clear fiberglass roof panel translucent with best quality

1. light transmission; 2. thermal insulation; 3. static-free; 4. anti-UV; 5. fire resisitance; 6. impact resistance

Yaohua FRP sheets are made of fiberglass and polyester resin and continuously molded by machine.

They are characterized by high-light transmittance, light-weight, high-strength, corrosion resistance, impact resistance, anti-ultraviolet, anti-static, heat preservation and insulation, accurate section dimensions and controllable cutting length. They can be used with various profiling panels and galvanized sheets.

Physical properties:

 

Tensile strength	80-100Mpa
Flexural strength	0-110 Mpa
Density	1.4-1.6g/cm³
Pasteur	≥40
Heat conductivity factor	0.67-0.96kv/m.h.°C
Temperature range	-40°C—+60°C
Water absorption	24 hours ≤0.32%
Wind loading rating	below 8 levels
Curing degree	≥82%

 

Product classification:

 

Plate type		thickness(mm)	width(mm)
	Flat plate	0.7-4.0	≤1400
	Sine wave	0.7-4.0	≤1200
	Trapezoidal wave	0.7-4.0	Mating with pressure plate
Fire resistance	Ordinary type

 

The technical standards of FRP sheet

Good tenacity. No cracking phenomenon when driving nails in roof installation.Having close combing with color steel plate. Cross-section thickness is uniform. The shape of FRP is consistent with steel plate.Transmittance loss rate is low. No yellowing phenomenon after long term service.Thermal expansion coefficient is close to that of steel plate. No cracking and water leakage in nail driving place because of expand with heat and contract with cold.Light through FRP assumes scattering shape and gentle.Bright and clean appearance. No distinct air bubble and cracking on FRP.Anti-ultraviolet and anti-chemistry corrosion.Anti-aging and anti-pulverization.Long service life.

clear fiberglass roof panel translucent with best quality